field niveau 3Age: 71 Arme(s): DST 36
|
|
|
|
voici en version anglaise
Sensitivity Adjustment Directions
The two adjustment screws work in concert with each other to set your release precisely. Make sure that the threads
of the screws are coated with blue Loc-Tite (#242) so that they will not back out. Then, set the sensitivity screw flush
(even) with the surface of the handle. Next, cock the cocking bar and gradually screw the travel set screw clockwise in
1/4 turn increments until the release fires. At this point, back the travel set screw out (counter-clockwise) exactly 1/4
turn. To achieve the heaviest setting without travel, our top pros recommend that you turn the travel screw 3/8 of a
turn counter-clockwise. We do not recommend turning the travel screw past this point. To achieve the lightest sensitivity,
back the travel screw out 1/4 turn from the firing point and start screwing in the sensitivity set screw (clockwise)
until the release fires again. Then back up the set screw one full turn. At this point, your release will be at its
lightest setting!
WARNING: Never draw bow without an arrow! Never point your bow in an unsafe direction! Do not let go of this
release at full draw. Think and act safely!
autrement tu peux télécharger la notice directement la notice sur le site du fabricant
voir le lien suivant: http://www.truball.com/olderInstructions.html |
|
Calendrier 
Calendrier
